Install The Internal Drive On The Side Panel Of The Device - Siemens SIMATIC IPC RW-545A Operating Instructions Manual

7.6.4

Install the internal drive on the side panel of the device

Requirement
• You know the important safety instructions under "Safety instructions on device and
system extensions (Page 47)".
• The device is equipped with a drive cage type A or type B.
• Be sure to read the information on the number and location of mounting locations for
drives under:
– Installation options for drives with drive cage type A (Page 104)
– Installation options for drives with drive cage type B (Page 114)
• A drive bay plate with a corresponding drive (HDD) approved for this device. You can find
information on spare parts under "Hardware accessories (Page 32)".
• Screwdriver TORX T10
Procedure
1. Screw the drive to the drive bay plate (available as option, not included in scope of delivery)
at the marked holes.
2. Screw from outside the drive bay plate on the inside to the side panel of the enclosure, at
position ① or position ②. The SATA connections each lie in the middle ③.
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
Expanding and assigning parameters to the device
7.6 Installing and removing drives
121