Securing With Clamps - Siemens SIMATIC IPC277D Operating Instructions Manual

3.2.2

Securing with clamps

Position of the mounting clamps
To ensure the necessary degree of protection on the HMI device, you need to use the
mounting clamps with the positions listed below.
The positions of the mounting clamps are marked by stamps on the cutouts. Fit mounting
clamps in all the stamped cutouts.
The following table shows the type, number and position of mounting clamps needed for the
various HMI devices.
HMI device
IPC277D, 7" display
IPC277D, 9" display
IPC277D, 12" display
IPC277D, 15" display
IPC277D, 19" display
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE
Mounting clamps
Type Quantity
10
12
12
Installing and connecting the device
3.2 Installing the device
Position on the HMI device
39