Table of Contents
Advertisement
Figure 83. Installing filler bracket in the Riser 2b (SNAPI)
Figure 84. Installing filler bracket in the Riser 2c
Next steps
If applicable, install an
expansion card into the expansion card
Installing an expansion card into the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
Steps
1. Pull and lift up the expansion card retention latch lock to open.
2. If installed, remove the filler bracket.
Safety
instructions.
Before working inside your
riser.
system.
Installing and removing system components
89
Advertisement
Table of Contents
