Table of Contents
Advertisement
M800S/M80/E80 Series Connection and Setup Manual
10 Connection of Remote I/O Unit
10.7 Connecting with Machine Control Signal
(FCU8-DX213 / FCU8-DX213-1 / FCU8-DX654 / FCU8-DX654-1)
[FCU8-DX213 / FCU8-DX213-1 / FCU8-DX654 / FCU8-DX654-1]
<Applicable cable>
Solid wire
Twisted wire
Bar terminal with insulation collar
Bar terminal without insulation collar
<Wire mounting tool type>
Screwdriver
Recommended manufacturer
<Bar terminal type>
Bar terminal
Recommended manufacturer
<Related items>
Connector pin assignment: "General Specifications: Remote I/O Unit" (CJ35/CJ36/SDI/SDO connector)
CAUTION
1. Connect the cable to the designated connector. Incorrect connections could damage the device.
2. Do not connect or disconnect the connection cables between each unit while the power is ON.
FCU8-DX213 / 213-1 :
CJ35
FCU8-DX654 / 654-1 :
2
: 0.08 - 1.5 mm
SDI
2
: 0.08 - 1.5 mm
2
: 0.25 - 0.75 mm
2
: 0.25 - 1.0 mm
: 210-719
FCU8-DX213 / 213-1 :
: WAGO
CJ36
FCU8-DX654 / 654-1 :
SDO
: 216 series
: WAGO
297
IB-1501269-J
Advertisement
Table of Contents
