Connecting With Remote I/O Unit - Mitsubishi M800S Series Connection And Set Up Manual

M800S/M80/E80 Series Connection and Setup Manual
7 Connection of Control Unit

7.5 Connecting with Remote I/O Unit

Connect the remote I/O unit to RIO1 or RIO2 connector of the control unit.
Control unit
(Note 1) Connect the J210 cable to the RIO1 or RIO2 connector of the control unit.
Check the connector position with the actual machine.
(Note 2) When you use a function with pulse output, the remote I/O unit cannot be connected to RIO1 and RIO2
connectors.
<Related items>
Cable drawing "Cable : J210 Cable"
Connector pin assignment: "General Specifications: Control Unit" (RIO1 connector, RIO2 connector)
IB-1501269-J
Remote I/O 1ch
RIO1
J210
RIO2
Remote I/O 2ch
J210
234
Remote I/O unit
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points
Max.64 stations
Max. input: 2048 points
Max. output: 2048 points