5.2.3 Connecting the Connector for the Coaxial Cable
The following section explains how to connect the BNC connector (connector
plug for the coaxial cable) to the cable.
1) Structure of the BNC connector and coaxial cable
The structure of the BNC connector and coaxial cable are shown in the
figure below.
Parts comprising the BNC connector
Plug shell
2) How to connect the BNC connector and the coaxial cable
a) Cut off the outer sheath of the coaxial cable to the length shown in the
diagram below.
b) Feed the nut, washer, gasket and clamp on the coaxial cable through,
as shown below, then unfasten the external conductor.
Nut
Washer
Clamp
Contact
Cut this portion of the outer sheath
Clamp
Structure of the coaxial cable
Outer sheath
Gasket
15 mm
(0.59 in.)
Nut
Washer
Gasket
16
External conductor
Insulation material
Internal conductor