Connecting With Drive Unit - Mitsubishi M800S Series Connection And Set Up Manual

M800S/M80/E80 Series Connection and Setup Manual
7 Connection of Control Unit

7.6 Connecting with Drive Unit

Connect the optical communication cables from the NC to the each drive unit so that they run in a straight line from the
NC to the drive unit that is a final axis. Note that the number of connected axes is limited by the NC.
(Note) Refer to "Precautions for Using Optical Communication Cable" when handling and wiring optical
communication cable.
Cable application table
Cable
J396
J395
G380
Panel internal wiring
Under 10m 10 to 30m
×
○
×
○
○ ○
235
Panel external wiring
10m or less 10 to 30m
×
○
○
×
×
○
IB-1501269-J