Canceling The Position Switch - Mitsubishi M800S Series Connection And Set Up Manual

Hide thumbs Also See for M800S Series:

Table of Contents

M800S/M80/E80 Series Connection and Setup Manual

25 Setting the Position Switches

25.3 Canceling the Position Switch

Enter a position switch number to be canceled (#75*1) in "# ( )" and a slash in "DATA ( )" on the setting field, then press

the [INPUT] key. Axis name of the specified position switch will be deleted, and the position switch is disabled. However,

the data in <dog1> and <dog2> are still retained in a memory. To enable the position switch again, only an axis name is

required for setting.

IB-1501269-J

M80 series E80 series M80w series