Connecting The Batteries; Control Unit Battery - Mitsubishi M800S Series Connection And Set Up Manual

Hide thumbs Also See for M800S Series:

Table of Contents

M800S/M80/E80 Series Connection and Setup Manual

17 Setting the Hardware

17.5 Connecting the Batteries

The battery is not connected when the machine is delivered. Be sure to connect the battery before

starting up.

A lithium battery in the control unit battery holder retains parameter settings, machining programs and the like, which

requires to be backed up at the power OFF.

Battery cumulative data holding time

Battery life

[Precautions for handling battery]

(1) Do not disassemble the battery.

(2) Do not place the battery in flames or water.

(3) Do not pressurize and deform the battery.

(4) This is a primary battery so do not charge it.

Do not short-circuit, charge, overheat, incinerate or disassemble the battery.

IB-1501269-J

45,000 hours (At 0 to 45°C. The life will be shorter if the temperature is high.)

Approx. 5 years (from date of battery manufacture)

M80 series E80 series M80w series