Table of Contents
Advertisement
M800S/M80/E80 Series Connection and Setup Manual
30 Adjust S-analog Screen
30.3 Performing Manual Adjustments
Adjusting the ch0 0V offset
Use the [ ↑ ] [ ↓ ] keys to move the cursor to item
(1)
"#10101", then press the [Manual adjust]menu
button.
(2)
Monitor the analog voltage.
(3)
<For plus-voltage>
Press the menu [Voltage +1] or [Voltage +10]
<For minus-voltage>
Press the menu [Voltage +1] or [Voltage +10].
(Note) "Current adjust data" range is -999 to 999.
The adjustments cannot exceed this range.
(4)
Press the [INPUT] key.
Adjusting the ch0 + gain
Use the [ ↑ ] [ ↓ ] keys to move the cursor to item
(1)
"#10102", then press the menu [Manual adjust].
(2)
Monitor the analog voltage.
(3)
<For 10V or higher>
Press the menu [Voltage -1] or [Voltage -10]
<For less than 10V>
Press the menu [Voltage +1] or [ Voltage +10].
(4)
Press the [INPUT] key.
IB-1501269-J
The current setting value is displayed at "Current adjust data".
A 0V analog voltage is output to ch0 at this time.
Adjust the 0V offset until the analog voltage is 0V ±3.5mV. The
setting range -999 to 999.
"Current adjust data" is adjusted downward in decrements of 1
each time the menu [Voltage +1] is pressed.
"Current adjust data" is adjusted downward in decrements of
10 each time the menu [Voltage +10] is pressed.
"Current adjust data" is adjusted upward in increments of 1
each time the menu [Voltage +1] is pressed.
"Current adjust data" is adjusted upward in increments of 10
each time the menu [ Voltage +10 ]is pressed.
"Current adjust data" is set as "ch0 0V offset", and the 0V offset
result is enabled.
The current setting value is displayed at "Current adjust data".
A ch0 +10V analog voltage is output at this time.
Adjust the + gain until the monitor voltage is 10V ±3.5mV. The
setting range -999 to 999.
"Current adjust data" is set as "ch0 + gain", and the adjustment
result is enabled.
542
Advertisement
Table of Contents
