EAS30310
REMOVING THE PRIMARY SHEAVE
1. Remove:
• Primary fixed sheave nut "1"
• Conical spring washer
• One-way clutch
• Primary fixed sheave "2"
TIP
While holding the primary fixed sheave with the
rotor holding tool "3", loosen the primary fixed
sheave nut.
Rotor holding tool
90890-01235
Universal magneto and rotor
holder
YU-01235
2
1
EAS30311
REMOVING THE SECONDARY SHEAVE
1. Remove:
• Clutch housing nut "1"
• Spacer "2"
• Clutch housing "3"
TIP
While holding the clutch housing with the sheave
holder "4", loosen the clutch housing nut.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
2
V-BELT AUTOMATIC TRANSMISSION
3
4
1
5-39
2. Loosen:
• Secondary sheave nut "1"
ECA21820
NOTICE
Do not remove the secondary sheave nut at
this stage.
TIP
While holding the secondary sheave with the
sheave holder "2", loosen the secondary sheave
nut one full turn with the locknut wrench "3".
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
Locknut wrench
90890-01348
Locknut wrench
YM-01348
1
EAS30312
DISASSEMBLING THE SECONDARY
SHEAVE
1. Remove:
• Secondary sheave nut "1"
TIP
While compressing the compression spring with
the clutch spring holder "2" remove the second-
ary sheave nut.
Clutch spring holder
90890-01337
Universal clutch compressor
holder
YM-33285
2
3