Yamaha MBK MW125 2014 Service Manual page 200

REAR SHOCK ABSORBER ASSEMBLIES AND SWINGARM
• Swingarm mounting bolt (upper side) "3"
(temporarily tighten)
• Swingarm mounting bolt (lower side) "4"
(temporarily tighten)
4. Tighten:
• Rear wheel axle nut "2"
• Swingarm mounting bolt (upper side) "3"
• Swingarm mounting bolt (lower side) "4"
Rear wheel axle nut
125 Nm (12.5 m·kgf, 90 ft·lbf)
Swingarm mounting bolt
31 Nm (3.1 m·kgf, 22 ft·lbf)
TIP
Tighten the rear wheel axle nut "2", then the
swingarm mounting bolts "3", "4".
1
2
5. Install:
• Rear shock absorber assemblies
Rear shock absorber assembly
upper nut
28 Nm (2.8 m·kgf, 20 ft·lbf)
Rear shock absorber assembly
lower bolt
16 Nm (1.6 m·kgf, 12 ft·lbf)
TIP
Tighten the rear shock absorber assembly nuts
and bolts temporarily, and then tighten them to
specification.
3
4
4-91