Assembling The Secondary Sheave; Installing The Primary Sheave, V-Belt And Secondary Sheave - Yamaha MBK MW125 2014 Service Manual

EAS30321

ASSEMBLING THE SECONDARY SHEAVE

1. Lubricate:
• Secondary fixed sheave inner surface "1"
• Secondary sliding sheave inner surface "2"
(with the recommended lubricant)
Recommended lubricant
Shell dolium grease R®
2. Install:
• Oil seals New
• Secondary sliding sheave "1"
TIP
Install the secondary sliding sheave onto the
secondary fixed sheave "2" with the oil seal
guide "3".
Oil seal guide
90890-01384
Oil seal guide
YM-33299
V-BELT AUTOMATIC TRANSMISSION
1
2
3
1
2
3. Install:
• Guide pins "1"
4. Lubricate:
• Guide pin grooves "2"
• O-rings "3"
(with the recommended lubricant)
Recommended lubricant
Shell dolium grease R®
5. Install:
• Spring seat
• Compression spring
• Clutch carrier "1"
• Secondary sheave nut "2"
TIP
• While compressing the compression spring
with the clutch spring holder "3", install the sec-
ondary sheave nut.
• Install the secondary sheave nut "2" with its ta-
pered side facing the clutch carrier.
Clutch spring holder
90890-01337
Universal clutch compressor
holder
YM-33285
EAS31234
INSTALLING THE PRIMARY SHEAVE, V-
BELT AND SECONDARY SHEAVE
1. Tighten:
• Secondary sheave nut "1"
5-42
New
3
1
2