V-BELT, CLUTCH AND SECONDARY / PRIMARY
SHEAVE
REMOVING THE PRIMARY SHEAVE
1. Remove:
• nut
(primary sheave)
• plate washer
• primary fixed sheave
NOTE:
Loosen the nut (primary fixed sheave) while
holding the primary fixed sheave with the rotor
holder
.
Rotor holder
90890-01235
REMOVING THE SECONDARY SHEAVE
AND V-BELT
1. Remove:
• nut
(secondary sheave)
• clutch housing
NOTE:
Loosen the nut (secondary sheave) while holding
the clutch housing with the sheave holder
Sheave holder
90890-01701
2. Remove:
• nut
(clutch carrier)
CAUTION:
Do not remove the nut (clutch carrier) yet.
NOTE:
Loosen the nut (clutch carrier) one turn using the
locknut wrench
with the rotor holder
Rotor holder
90890-01235
4-31
ENG
while holding the clutch carrier
.
.