Removing The Primary Sheave Assembly; Secondary Sheave Assembly And V-Belt - Yamaha XP500 Service Manual

1
a
1
b
V-BELT AUTOMATIC TRANSMISSION
1
2
3
2
REMOVING THE PRIMARY SHEAVE
ASSEMBLY, SECONDARY SHEAVE
ASSEMBLY AND V-BELT
1. Remove:
• primary sheave nut 1
• secondary sheave nut 2
NOTE:
While holding the primary and secondary
sheave with the sheave holder, loosen the nut.
Sheave holder
90890-01481
2. Install:
• bolts 1
NOTE:
Insert M6 bolts (more than 45 mm (1.77 in))
into the holes of the secondary sheave assem-
bly, and then tighten the bolts to open the sec-
ondary sheave assembly.
3. Remove:
• secondary sheave assembly 1
• primary sheave assembly 2
• V-belt 3
NOTE:
• Before removal, apply a and b alignment
marks.
• Align these marks during reassembly.
• Remove the primary sliding sheave, second-
ary sheave assembly and V-belt together.
4. Remove:
• primary fixed sheave 1
5 - 62
ENG