EAS31266
REMOVING THE FRONT UPPER PANEL
1. Remove:
• Front upper panel
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Remove the screws.
b. Unhook the projections on the front upper
panel from the side cowlings.
c. Pull the front upper panel upward to remove
the projection from the grommet in the head-
light unit.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
EAS31267
INSTALLING THE FRONT UPPER PANEL
1. Install:
• Front upper panel
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Push the front upper panel rearward to fit the
projection into the grommet in the headlight
unit.
b. Fit the projections on the front upper panel
into the slots in the side cowlings.
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
c. Install the screws.
▼▼▼
▲
▲▲▲
▲ ▲▲▲
▲
EAS31268
REMOVING THE METER ASSEMBLY COVER
1. Remove:
• Meter assembly cover
▼
▼▼▼
▼ ▼▼▼
▼
a. Remove the screws.
▲▲▲
b. Slide the meter assembly cover forward and
remove it.
▲
▲▲▲
▲ ▲▲▲
▲
EAS31269
INSTALLING THE METER ASSEMBLY
▼▼▼
COVER
1. Install:
• Meter assembly cover
4-10
GENERAL CHASSIS (5)
Front upper panel screw
1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
▼ ▼▼▼
▼
▼▼▼
▲ ▲▲▲
▲
▲▲▲