Fitting The Evac-Nl Mimic Display Driver Ft2003-N1 - Siemens FS720 Mounting & Installation

Installing, exchanging and connecting modules
7
Remote EVAC-NL and EVAC-NL mimic display driver

7.32.2 Fitting the EVAC-NL mimic display driver FT2003-N1

224 | 248
Building Technologies
Fire Safety
5
X3
4
X1
3
Figure 134: Assembly of EVAC-NL mimic display driver FT2003-N1
1 EVAC-NL operating unit FTO2007-N1
2
Ribbon cable between EVAC-NL connector board and EVAC-NL
operating unit
3 EVAC-NL connector board FTI2002-N1
4 4 spacer bolts (15 mm) and fixing screws for securing housing
5 4 spacer bolts (15 mm) and fixing screws for fixing printed circuit board
X1/ Connection strip for supply, monitoring signals and RS485 connection
FTI2002
X2 Connections of LED mimic display indicator 1...17
X3 Connections of LED mimic display indicator 18...34
X4 Ribbon cable connection to EVAC-NL FTO2007
X5 Connections for mimic display operation
X400 Connection peripheral data bus, input
X402 Connection for peripheral data bus, output
X2
X1
X402
2
X4
X5
A6V10210390_m_en_--
1
X400
2018-08-29