Table of Contents
Advertisement
10.3 Display
10.3.1
Parameter "Refresh" defines the time interval within which the measuring
variables are displayed. The "Refreshrate" can be increased in steps of 0.5 sec.
to 10 sec. An increase in the refresh rate time causes an increased "filtering" of
the display value.
10.3.2
With the menu item "Orientation" the display can be rotated either clockwise or
counterclockwise in 90 ° increments. As the display rotates, both the display
contents and the function of the 4 control buttons are turned.
10.3.3
This parameter can be used to configure the display to either show one
measurement variable or two measurement variables.
10.3.4
With the aid of this parameter, the measurement variables provided by the
transmitter can be displayed. Depending on the 'Layout' display, either one or two
measuring variables can be displayed.
10.3.5
The following functions are available:
reading
flow
Temperature
Partial quantity counter
Totalizer
A5E48762204-AB
Refresh
Orientation
Layout
Display value
Keys HOTKEYs
MIN/MAX / Reset
Yes / Yes
Yes / Yes
Not available
Not available
SITRANS FM100
Two independent user keys
are available, which can be
individually
assigned
different
display
The 2 user keys are available
in measurement mode top
right and left. If the buttons
are activated, they are backlit
in blue and the programmed
function can be executed by
touching.
Value display / Reset
Yes / No
Yes / No
Yes / Yes
Yes / No
with
functions.
page 17
Advertisement
Table of Contents
