Siemens FS720 Mounting & Installation page 129

Building Technologies
Fire Safety
5
4
3
2
X13
Figure 64: Installation of both network modules (SAFEDLINK)
1 Network module (SAFEDLINK) on X13 (master module)
2 Fixing screws (2 pieces)
3 Mounting links on support plate
4 Nut for cable gland (2 per module)
5 Cable gland (2 per module)
6 Degraded mode network module (SAFEDLINK) on X12
7 Connector X1 on the rear of the network module
X3 Connection terminal C-WEB
X1 Plug-type connection for main module
3
Plug-type connection for degraded mode module
X1
2
When using shielded cables, the cable screw connections are needed to secure
1
the shielding.
When installing only one network module (SAFEDLINK), ensure that the main
module is installed at the correct position on X13.
Installing, exchanging and connecting modules
Network module (SAFEDLINK)
X3
1
1
7
X3
6
X12
129 | 248
A6V10210390_m_en_--
2018-08-29
7