Installing, exchanging and connecting modules
7
Power supply (150 W)
7.6.2 Fitting an additional power supply (150 W)
104 | 248
Building Technologies
Fire Safety
The additional power supply (150 W) FP2005-A1 in the Comfort housing is
installed vertically along with the existing power supply to save space.
Preparatory work
Before the additional power supply FP2005-A1 can be installed, the existing power
supply and the DIN rail must be removed as described in the previous chapter.
Installing a power supply
Figure 51: Installation of an additional power supply (150 W) in the Comfort housing
1
Lugs at the top for screw fastening
2
Additional power supply (150 W)
3
Existing power supply (150 W)
4
Distance pins at the bottom
X1
Mains connection terminal
X8
Supply output terminal
X11
Monitoring signal terminal
1
4
X11
X8
2
3
X1
A6V10210390_m_en_--
2018-08-29