Cancelling Memory Transmission (While Originals Are Being Scanned); Cancelling Memory Transmission (During Communication) - Kyocera TASKalfa MA4500ci Operation Manual

Sending Faxes > Basic transmission procedure
Cancelling Memory Transmission (while originals are
being scanned)
1

Cancelling Memory Transmission (during communication)

NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
1
2
Select the [Stop] key.
During memory transmission, to cancel scanning while originals are being scanned,
select the [Stop] key, or select [Cancel].
Scanning of originals is canceled, and the originals are ejected. When originals remain in
the document processor, take them out from the original table.
Select the [Status/Job Cancel] key.
Canceling Transmission.
1 Select [Sending Jobs].
2 Select the transmission job that you want to cancel and select [Cancel] > [OK]
Cancel the transmission.
NOTE
In some cases, transmission may take place even if the [Stop] key or [Cancel] is selected.
3-5