Kyocera TASKalfa MA4500ci Operation Manual page 52

Sending Faxes > Methods For Entering the Destination
3
4
5
Select transmission settings.
Select [Detail].
Subaddress communication, encrypted transmission, transmission start speed and ECM
can be set.
Key
SubAddress Set this to transmit using a SubAddress.
Transmission This is set to change the transmission start speed. Select the speed
Start Speed from 9,600 bps, 14,400 bps, and 33,600 bps.
Normally this should be used with the default setting.
ECM ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error
occurs. FAX machines that have ECM mode check for errors as they
communicate, preventing distortion of the image due to noise on
the line and other conditions.
Encrypted This is set when using encrypted transmission to send the data.
Transmission Refer to the following for the method for setting Encrypted Transmission.
NOTE
When [Add to Address Book] is displayed, you can register entered contents to the
Address Book.
Select [OK].
Entry of the destination finishes.
Select [+].
The destination is added to the destination list.
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and select [OK].
Machine's Operation Guide
Select [Fax Entry] to enter the next fax number.
Broadcast Transmission (page 3-13)
If [Broadcast] is set to [Prohibit], it is not possible to enter multiple destinations.
Machine's Operation Guide
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP)
transmission to send as one job.
Machine's Operation Guide
Sub Address Transmission (page 5-16)
NOTE
Encryption (page 5-28)
3-8
Description