Cancelling The Transmission - Kyocera ECOSYS M3540idn Operation Manual

Sending Faxes > Basic transmission procedure

Cancelling the Transmission

The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained
here.
Cancelling Memory Transmission (while originals are being scanned)
1
Cancelling Memory Transmission (during communication)
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
1
2
Press the [Stop] key.
During memory transmission, to cancel scanning while originals are being scanned, press the
[Stop] key on the operation panel, or press [Cancel] on the touch panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original output table.
Press the [Status/Job
Canceling Transmission.
1
Press [Send Job Status].
2
Select the transmission job that you want to cancel and press [Cancel].
3
Select [Yes] to cancel the transmission.
NOTE
In some cases, transmission may take place even if the [Stop] key or [Cancel] is pressed.
Cancel] key.
3-5