Kyocera TASKalfa MA4500ci Operation Manual page 185

Fax Settings > Default FAX settings
Fax Reception
[Home] key > [...] > [System Menu] > [Function Settings] > [Fax] > [Fax Reception]
Item
Rings Rings(Normal)
Rings (TAD)
Rings(Fax/Phone)
RX Start Speed
ECM RX
Others RX Setting
Remote SW Dial
Encrypted
Reception
If the reception method is fax automatic reception, the number of rings until the
machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
If the reception method is FAX/Answering Machine Auto Switch Reception, the
number of rings until the machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
If the reception method is FAX/Phone Auto Switch Reception, the number of
rings until the machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Change the RX Start Speed.
When communication conditions are bad, the fax may not be received correctly.
In that case, set a lower RX Start Speed.
Value: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Set whether ECM RX is performed.
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
Value: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly
longer than when [Off] is selected.
Select the reception mode.
Value: Auto (Normal), Auto (Fax/Phone), Auto (TAD), Auto (DRD), Manual RX
If Auto (DRD) is selected, select the DRD Pattern.
Value: Pattern 1 (Normal Ring), Pattern 2 (Double Ring),
Pattern 3 (Short-Short-Long), Pattern 4 (Short-Long-Short)
DRD reception mode is available for some countries.
FAX Reception (page 4-2)
Manual Reception (page 4-4)
DRD Reception (Available for some countries.) (page 5-36)
To start fax reception by operation from the connected telephone set, use the
following operation.
Value: 00 - 99
Remote Switch Function (page 5-40)
Turns on reception by encrypted communication.
Value: Off, On
If turned on, select the encryption key.
Encryption (page 5-28)
8-12
Description