Managing Jobs > Printing Administrative Reports (Result Report Setting)
Printing Administrative Reports (Result Report
Setting)
You can print various administrative reports to check the results of fax transmission or the status of the functional setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also
print the transmitted image in the send result report.
1
2
Attach Image of NW FAX
Select whether the image to be attached to an Activity Report will be [Body] or [Cover Page], when using network fax.
NOTE
For the [Send Result Report] > [Fax] > select [On], [Error Only] or [Specify Each Job] and the attachment of Send
image is set at [Partial Image] or [Full Image], this setting is displayed.
Send Result Reports (page 7-7)
Display the screen.
[Home] key > [...] > [System Menu] > [Notification/Report] > "Result Report Setting"
[Send Result Report] > [Fax]
Configure the function.
1
Select [Off] (not to print), [On] (to print), [Error Only], or [Specify Each Job].
NOTE
When [Specify Each Job] is selected, it is possible to set a send result report when
transmitting.
Fax TX Report (page 3-27)
2
If you selected [On], [Error Only] or [Specify Each Job], specify whether the
transmitted image is to be attached by selecting [Off] (do not print transmitted
image), [Partial Image] (print part of the transmitted image at full size), or [Full
Image] (print the entire transmitted image at reduced size).
With transmitted image
Send Result Report
Completed
Without transmitted image
7-7
Send Result Report
Completed