Using The Pms Application For Recovery And Control Of Node Boards - Sun Microsystems Netra CT 820 Administration Manual

To Show the Current Escape Character
M
At the distributed management card prompt, enter the following command:
I
hostname cli> showescapechar
The current escape character is displayed:
hostname cli> escape_char: value
M To Change the Default Escape Character
At the distributed management card prompt, enter the following command:
I
hostname cli> setescapechar value
where
character from ~ (tilde) to # (pound sign), enter the following:
hostname cli> setescapechar #
The pound sign is now the escape character for all future console sessions.
Using the PMS Application for Recovery
and Control of Node Boards
This section describes specifying recovery operations and controlling node boards
through the distributed management card PMS CLI commands.
60 Netra CT 820 Server System Administration Guide • March 2004
value is any printable character. For example, to change the default escape