where mm is the current month; dd is the current day of the month; HH is the
current hour of the day; MM is the current minutes past the hour; cc is the current
century minus one; and yy is the current year.
To Set the Distributed Management Card Date
M
and Time as an NTP Client
1. Log in to the distributed management card.
2. Set the date and time as an NTP client:
hostname cli>
setntpserver addr
where addr is the IP address of the NTP server.
Displaying Board State Information
Board information, including type of board, power state of the board, and boot state
of the board can be displayed for each slot in the system using the CLI
showcpustate command.
Chapter 3 Administering Your System
49