Sun Microsystems Netra CT 820 Administration Manual page 54

Hide thumbs Also See for Netra CT 820:
Table of Contents

Advertisement

Active Distributed Management Card Command-Line Interface Commands (Continued)
TABLE 3-1
Command
Type
Command
setpanicdump
[all|cpu_node]
[true|false]
showpanicdump
[all|cpu_node]
setescapechar value
showhealth [-b cpu_node]
pmsd
Administra-
useradd [-h] username
tion
userdel [-h] username
usershow [-h] [username]
userpassword [-h]
username
userperm [-h] username
[c|u|a|r]
logout
password [-h]
flashupdate -d
cmsw|bcfw|bmcfw|rpdf|
scdf -f path
40
Netra CT 820 Server System Administration Guide • March 2004
Permis-
sion
Description
a
Set whether a panic dump is generated when a node
is reset, where all means all nodes 3 through 20,
and cpu_node can be a specific node 3 through 20.
Show whether or not a panic dump has been set for
all nodes 3 through 20 or for a specific node 3
through 20.
Set the escape character to end a console session.
The default is a ~ (tilde).
Show the healthy information of a node, where
cpu_node can be 0 through 21.
a
Display help information on starting, stopping, and
controlling the PMS daemon on the distributed
management card. Refer to
Management Service Application" on page 30
"Using the PMS Application for Recovery and
Control of Node Boards" on page 60
information.
u
Add a user account. The default user account is
netract. The distributed management card
supports 16 accounts.
u
Delete a user account.
Show user accounts.
u
Set or change the password of a specified user
account.
u
Set or change the permission levels for a specified
user account.
Log out of the current session.
u
Change the existing password.
a
Flash update the distributed management card
software, where cmsw represents the chassis
management software;. bcfw represents the boot
control firmware; bmcfw represents the BMC
firmware; rpdf represents the system configuration
repository; and scdf initializes the system
configuration variables to their defaults. Refer to
"Updating the Distributed Management Card Flash
Images" on page 46
"Enabling the Processor
for more
for more information.
and to

Advertisement

Table of Contents
loading

Table of Contents