Table of Contents
Advertisement
Active Distributed Management Card Command-Line Interface Commands (Continued)
TABLE 3-1
Command
Type
Command
Configuration
sethostname hostname
(Other)
setservicemode
true|false
PMS daemon
pmsd start [-p port_num]
control
[-e server_admin_state] [-d]
pmsd stop [-p port_num]
pmsd slotaddressset -s
slot_num -i ip_addr
pmsd slotaddressshow
-s slot_num|all
pmsd slotrndaddressadd
-s slot_num|all -n ip_addr
-d ip_addr -r slot_num
pmsd
slotrndaddressdelete
-s slot_num|all
-i index_num|all
pmsd
slotrndaddressshow
-s slot_num|all
-i index_num|all
pmsd operset -s
slot_num|all -o
maint_config|
oper_config|
none_config|
graceful_reboot
pmsd infoshow -s
slot_num|all
pmsd historyshow -s
slot_num|all
pmsd recoveryoperset
-s slot_num|all
-o pc|rst|rstpc|pd|rb
42
Netra CT 820 Server System Administration Guide • March 2004
Permis-
sion
Description
a
Set the hostname to be used in the CLI prompt. The
default is netract. The maximum length is 32
characters.
a
Set whether MOH and PMS services are started
automatically on the distributed management card
after a reboot. The default is false, meaning that
these services are automatically started.
a
Start PMS on the distributed management card.
a
Stop PMS on the distributed management card.
a
Set the IP address for the distributed management
card to control and monitor a node board.
a
Print the IP address set with the pmsd
slotaddressset command.
a
Add address information for a node board to control
other node boards.
a
Delete address information added with the pmsd
slotrndaddressadd command.
a
Print address information added with the pmsd
slotrndaddressadd command.
a
Enable automatic recovery of a node board.
a
Print PMS system information.
a
Print a log of PMS system events and time stamps.
a
Manually recover a board in case of fault.
Advertisement
Table of Contents
