Table of Contents
Advertisement
Active Distributed Management Card Command-Line Interface Commands (Continued)
TABLE 3-1
Command
Type
Command
pmsd
recoveryautooperset -s
slot_num|all
-o pc|rst|rstpc|pd|rb|
rbpc|none|trg [-d
startup_delay] [-f on|off]
[-r retries] [-n
inter_op_delay] [-p
reset_power-cycle_delay]
pmsd
recoveryautoinfoshow
-s slot_num|all
pmsd hwoperset -s
slot_num|all -o
powerdown|powerup|
reset|mon_enable|
mon_disable [-f]
pmsd hwinfoshow -s
slot_num|all
pmsd hwhistoryshow -s
slot_num|all
pmsd osoperset -s
slot_num|all -o
reboot|mon_enable|
mon_disable [-f]
pmsd osinfoshow -s
slot_num|all
pmsd oshistoryshow -s
slot_num|all
pmsd appoperset -s
slot_num|all -o
force_offline|
vote_active|
force_active
pmsd appinfoshow -s
slot_num|all
pmsd apphistoryshow -s
slot_num|all
pmsd version
pmsd usage
Permis-
sion
Description
a
Automatically recover a board in case of fault.
a
Print the configuration information affected by the
recoveryautooperset command.
a
Perform operations on a node board hardware.
a
Print PMS system information on the hardware.
a
Print a log of PMS hardware events and time
stamps.
a
Perform operations on a node board operating
system.
a
Print PMS system information on the operating
system.
a
Print a log of PMS operating system events and time
stamps.
a
Perform operations on a node board applications.
a
Print PMS system information on the applications.
a
Print a log of PMS application events and time
stamps.
a
Print the PMS version.
a
Print a synopsis of the pmsd commands.
Chapter 3 Administering Your System
43
Advertisement
Table of Contents
