Table 2-1 Fru Id Information Specified Using The Setfru Command - Sun Microsystems Netra CT 820 Administration Manual

The FRU instance is a logical number; it matches the slot number only for the slot
FRU target. The FRU field is case-insensitive.
TABLE 2-1
command.
FRU ID Information Specified Using the setfru Command
TABLE 2-1
FRU FRU
Target Instance FRU Field
midplane 1 SysmgtbusIPSubnet
midplane 1 SysmgtbusIPSubnetMas
k
midplane 1 Location
midplane 1 User_Label
dmc 1 or 2 Cust_data
slot 2 to 21 Acceptable_Fru_Types
shows the FRU ID information that can be specified with the CLI setfru
Value
IP subnet address
(hexadecimal)
IP subnet mask
(hexadecimal)
text description
text description
text description
vendor:partnumber
Description
Specify the IP subnet address for the
system management network. The
default is 0xc0a80d (192.168.13).
Specify the IP subnet mask for the
system management network. The
default is 0xffffffe0
(255.255.255.224).
A description of the location (for
example, the number on the chassis
label) of the Netra CT system. This
description is used in the MOH
application. The text can be up to 80
characters in length.
Any customer-supplied information.
The text can be up to 10 characters in
length.
Any customer-supplied information.
The text can be up to 80 characters in
length. FRU instance 1 is the DMC in
slot 1A; FRU instance 2 is the DMC in
slot 1B.
First, specify the chassis slot number
to be configured. (Slots are numbered
starting from the left.) Second, specify
the allowable plug-in board(s) for
that slot, where the value is the
vendor name and part number
(separated by a colon) of the board.
Use the showfru command to
display this information. Multiple
boards may be specified, separated by
a semi-colon (;). The default is to
power on all Sun-supported cPSB-
only boards.
Chapter 2 Configuring Your System 13