Displaying Netra Ct Server Fru Id Information - Sun Microsystems Netra CT 820 Administration Manual

Displaying Netra CT Server FRU ID
Information
FRU ID information entered during the manufacturing process and through the
distributed management card CLI setfru command can be displayed using the
showfru command.
TABLE 2-2
showfru command. Use the FRU field to specify the information you want; the FRU
field is case-insensitive.
FRU ID Information Displayed Using the showfru Command
TABLE 2-2
FRU
FRU Target Instance
midplane 1
midplane 1
midplane 1
midplane 1
midplane 1
midplane 1
midplane 1
midplane 1
dmc 1 or 2
dmc 1 or 2
shows the FRU ID information that can be displayed with the CLI
FRU Field
Sun_Part_No
Sun_Serial_No
SysmgtbusIPSubnet
SysmgtbusIPSubnetMask
Vendor_Name
Fru_Shortname
Location
User_Label
Sun_Part_No
Sun_Serial_No
Description
Display the part number for the midplane.
Display the serial number for the midplane.
Display the system management network IP
subnet address in hexadecimal format for this
system.
Display the system management network IP
subnet mask in hexadecimal format for this
system.
Display the vendor name for the midplane.
Display the FRU short name for the midplane.
Display any customer-supplied text specified for
the Location of this system.
Display any customer-supplied text for this field.
Display the part number for the distributed
management card in a particular slot. FRU
instance 1 is the DMC in slot 1A; FRU instance 2
is the DMC in slot 1B.
Display the serial number for the distributed
management card in a particular slot. FRU
instance 1 is the DMC in slot 1A; FRU instance 2
is the DMC in slot 1B.
Chapter 2 Configuring Your System 15