Cli Commands; Table 3-1 Active Distributed Management Card Command-Line Interface Commands - Sun Microsystems Netra CT 820 Administration Manual

All CLI commands can be used on the active distributed management card; a subset
of CLI commands can be used on the standby distributed management card.

CLI Commands

TABLE 3-1
commands by type, command name, default permission required to use the
command, and command description.
available for the standby distributed management card.
Default permission levels are:
c (console permission; authorized to connect to other server console)
I
u (user administration permission; authorized to use commands that can add,
I
delete, and change permission of users)
a (administration permission; authorized to change the state of the CLI
I
configuration variables)
r (reset/poweron/poweroff permissions; authorized to reset, poweron, and
I
poweroff any of the node boards)
blank (permission not required).
I
The permission level for a user can be changed with the userperm command.
A -h option with a command indicates that help is available for that command.
Active Distributed Management Card Command-Line Interface Commands
TABLE 3-1
Command
Type Command
Status
showenvironment
shownetwork
showipmode
-b port_num
showipaddr
-b port_num
showipnetmask
-b port_num
showipgateway
showdate
38 Netra CT 820 Server System Administration Guide • March 2004
lists the active distributed management card command-line interface
Permis-
sion
lists the subset of the CLI commands
TABLE 3-2
Description
Display a summary of current environmental
information, such as fantray and power supply
status.
Display the current network configuration of the
distributed management card.
Display the value of ip_mode for the specified port
number.
Display the value of ip_addr for the specified port
number.
Display the value of ip_netmask for the specified
port number.
Display the value of ip_gateway for the
distributed management card.
Display the system date.