Table of Contents
Advertisement
Table 5: LED Blink Patterns for AP States
LED Color
You can also use the Status LED for troubleshooting your AP. The following tables list the LED behavior
corresponding to different types of errors.
Table 6: LED Blink Patterns for Network Connectivity Errors
LEDs
(Continued)
Blink Patterns
Green gradually fades to off
Blink Pattern
2 yellow
3 yellow
4 yellow
5 yellow
AP Status
The AP is receiving insufficient
power.
Error
No ethernet link
No IP Address
No default gateway
Default gateway
unreachable
Description
The AP does not have an
Ethernet link.
This error is usually seen
if you did not connect the
AP to a switch when
using a power injector.
There is no IP address in
the static configuration or
through the DHCP lease.
Neither the static
configuration nor the
DHCP lease has a default
gateway.
The AP does not receive
an ARP response from the
default gateway.
51
Advertisement
Table of Contents
