Juniper AP45 Deployment Manual page 55

Table 5: LED Blink Patterns for AP States
LED Color Blink Patterns
Blinking red for 3 seconds
Blinking green-off-yellow-off for 12
seconds
Blinking green and yellow for 30–
40 seconds
White steadily on
Green steadily on
Blue steadily on
Blinking orange
Blinking green and purple
Red steadily on
Gradually progresses to red
White gradually fades to off
AP Status
The AP is starting to boot.
The AP is booting.
The AP is connecting to the Juniper
Mist cloud.
The AP is connected to the cloud.
The AP is configured by the Juniper
Mist cloud.
There is at least one wireless client
connected to the AP.
The AP is upgrading.
The status LED blinks green and
purple when the user clicks the
Locate button in the Access Point
details page.
The AP has failed.
The user is holding down the Reset
button.
The AP is going to reset the
configuration to the factory default.
50