Juniper AP45 Deployment Manual page 4

Mount an AP21 or a BT11 on a 5/8-Inch Threaded Rod | 31
Mount an AP21 or BT11 on a 16-mm Threaded Rod | 33
Mount an Access Point on a 1/2-Inch Threaded Rod | 35
Attach External Antennas | 38
Connect an AP45 to the Network and Power It On | 40
Rename a Juniper Access Point in the Mist Portal | 42
Assign an Access Point to a Site | 43
Release an Access Point from an Organization | 44
Upgrade the Firmware on a Juniper Access Point | 44
Check for AP Firmware Updates | 44
Upgrade the Firmware on an AP Manually | 45
Reset an Access Point to the Factory-Default Configuration | 46
4 Troubleshoot
Troubleshoot a Juniper Access Point | 49
Status LED Blink Patterns | 49
Troubleshoot AP Claiming Issues | 60
Troubleshoot Access Point Disconnection Issues | 61
Contact Customer Support | 74
iv