Supported Mounting Brackets For Ap45 - Juniper AP45 Deployment Manual

Mount an AP21 or a BT11 on a 5/8-Inch Threaded Rod | 31
Mount an AP21 or BT11 on a 16-mm Threaded Rod | 33
Mount an Access Point on a 1/2-Inch Threaded Rod | 35
Attach External Antennas | 38
This topic provides the various mounting options for the AP45. You can mount the AP on a wall, ceiling
or junction box. The AP ships with a universal mounting bracket that you can use for all mounting
options. To mount the AP on a ceiling, you'll need to order an additional adapter based on the type of
ceiling.
NOTE: We recommend that you claim your AP before you mount it. The claim code is located on
the rear of the AP and it might be difficult to access the claim code after you mount the AP.

Supported Mounting Brackets for AP45

Table 4 on page 16 lists the brackets available for the AP45.
Table 4: Mounting Brackets for AP45
Part Number
APBR-U
APBR-T58
APBR-M16
APBR-ADP-CR9
APBR-ADP-RT15
Description
Universal bracket for t-bar and drywall mounting
Bracket for mounting the AP on a 5/8-in. threaded rod
Bracket for mounting the AP on a 16 mm threaded rod
Bracket adapter for mounting the AP on a recessed
9/16-in. t-bar or channel rail
Bracket adapter for mounting the AP on a recessed
15/16-in. t-bar
16