Mount An Ap21 Or A Bt11 On A 5/8-Inch Threaded Rod - Juniper AP45 Deployment Manual

Figure 23: Attach the APBR-U Mounting Bracket to the ADPR-ADP-WS15 Adapter
3. Position the AP such that the keyholes of the mounting bracket engage with the shoulder screws on
the AP. Slide and lock the AP in place.
Figure 24: Attach the AP to a 1.5-Inch T-Bar

Mount an AP21 or a BT11 on a 5/8-Inch Threaded Rod

To mount an AP21 or a BT11 on a 5/8-in. threaded rod, you'll need to use the APBR-T58 bracket. that
you'll need to order separately.
1. Attach the APBR-T58 bracket to the threaded rod by using the lock washer and nut provided.
31