Release An Access Point From An Organization; Upgrade The Firmware On A Juniper Access Point; Check For Ap Firmware Updates - Juniper AP45 Deployment Manual

Release an Access Point from an Organization

If you want to use an access point (AP) in any other organization, you must first release the AP from the
current organization. Before you release an AP, we recommend that you note down the MAC address of
the AP and the claim code (using the API).
To release an AP from an organization:
1. From the left menu of the Mist portal, select Organization > Inventory.
2. Click Access Points.
3. Select one or more APs that you want to release, and then select More > Release.
Mist releases the APs, and you can now use those APs in other organizations.

Upgrade the Firmware on a Juniper Access Point

IN THIS SECTION

Check for AP Firmware Updates | 44

Upgrade the Firmware on an AP Manually | 45
You can upgrade the firmware on an access point (AP) either manually or automatically. With the
automatic upgrade method, you can only upgrade the firmware, whereas you can use the manual
process to upgrade or downgrade the firmware. This topic covers the manual upgrade process that you
can use to upgrade the AP firmware. For information about the automatic upgrade process, see
Automatic Firmware Upgrades.
Check for AP Firmware Updates
You can check for current firmware versions supported on AP models, features supported in a firmware
version, and resolved issues. To view details about AP firmware:
1. Log in to the Mist portal using your credentials.
2. Click the ? (question-mark) icon in the top-right corner.
A drop-down menu appears.
44
Enable