Download
Share
Print this page
Juniper Mist AP12 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Wireless Access Point
  5. Mist AP12
  6. Hardware installation manual

Juniper Mist AP12 Hardware Installation Manual

Hide thumbs Also See for Mist AP12:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
AP12 Hardware Installation Guide
Overview
The Mist AP12 contains three IEEE 802.11ax radios that deliver up to 2x2
MIMO with two spatial streams when operating in multi-user (MU) or single-
user (SU) mode.
AP12 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
1

Advertisement

loading

Related Manuals for Juniper Mist AP12

Summary of Contents for Juniper Mist AP12

  • Page 1 AP12 Hardware Installation Guide Overview The Mist AP12 contains three IEEE 802.11ax radios that deliver up to 2x2 MIMO with two spatial streams when operating in multi-user (MU) or single- user (SU) mode. AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...
  • Page 2 Passive RJ45 Pass Thru (rear to bottom) 10/100/1000BASE-T RJ45 interface with Class 2 PSE out Eth1+PSE (enabled if you have 802.3at PoE input on Eth0) 10/100/1000BASE-T RJ45 interfaces Eth2-Eth3 AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...
  • Page 3 AP12 Mounting AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...

  • Page 4: Technical Specifications

    Maximum PHY rate 5GHz – 1201 Mbps 2.4GHz – 574Mbps Indicators Multi-color status LED CAN/CSA-C22.2 No. 62368-1-14 FCC Part 15.247, 15.407, 15.107, and 15.109 Compliance standards RSS-247 ICES-003 (Canada) AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...

  • Page 5: Warranty Information

    US Regulatory domain AP12-WW 802.11ax 2+2 Wall Plate AP – Internal Antenna for the WW Regulatory domain Mounting brackets APBR-WP1 Bracket for AP12 Desk stand for AP12 APBR-DS1 AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...

  • Page 6: Regulatory Compliance Information

    This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by the 802.3at Standard. If you need further assistance with purchasing the power source, please contact Juniper Networks, Inc.

  • Page 7: Industry Canada

    IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 29 cm de distance entre la source de rayonnement et votre corps. AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...
  • Page 8 (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. AP12 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved...