Video:
Video:
Mount an Access Point on a Double-Gang Junction Box
You can mount an access point (AP) on a double-gang junction box by using the universal mounting
bracket (APBR-U) that we ship along with the AP. To mount an AP on a double-gang junction box:
1. Attach the mounting bracket to the double-gang junction box by using four screws. Ensure that you
insert the screws in the holes marked 2 as shown in
Figure 6: Attach the APBR-U Mounting Bracket to the Double-Gang Junction Box
2. Extend the Ethernet cable through the bracket.
3. Position the AP such that the shoulder screws on the AP engage with the keyholes of the mounting
bracket. Slide and lock the AP in place.
Figure 6 on page
21.
21