Mount an Access Point on a US 4-Inch Square Junction Box
To mount an access point (AP) on a US 4-in. square junction box:
1. Attach the mounting bracket to the 4-in. square junction box by using two screws. Ensure that you
insert the screws in the holes marked 3 as shown in
Figure 10: Attach the Mounting Bracket (APBR-U) to a US 4-Inch Square Junction Box
2. Extend the Ethernet cable through the bracket.
3. Position the AP such that the shoulder screws on the AP engage with the keyholes of the mounting
bracket. Slide and lock the AP in place.
Figure 10 on page
24.
24