Table of Contents
Advertisement
To test the CAL OUTPUT ports (oscilloscope)
Verify the DC CAL OUTPUT port
Using the BNC-to-banana adapter, connect the BNC cable between the multimeter
1 1
and the oscilloscope DC CAL OUTPUT connector.
The digital voltmeter should read close to 0.0000 V. Record the reading to four
2 2
decimal places. V
= _______.
1
In the Calibration menu set the DC Volts to 5 V.
3 3
The digital voltmeter should read close to 5.0000 V. Record the reading to four
4 4
decimal places. V
= _______.
2
In the Calibration menu set the DC Volts to 0 V.
5 5
Subtract V
from V
. The difference should be between 4.990 and 5.010 V. Record
6 6
1
2
the reading in the performance test record.
3–66
Advertisement
Table of Contents
