Chapter 3: Configuring the Emulator
Setting Up the BNC Port
Setting Up the BNC Port
This section shows you how:
•
•
To output the trigger signal on the BNC port
•
Choose the Settings→BNC→Outputs Analyzer Trigger (ALT, S, B, O)
command.
The HP 64700 Series emulators have a BNC port for connection with external
devices such as logic analyzers or oscilloscopes.
This command enables the trigger signal from the internal analyzer to be fed
to external devices.
To receive an arm condition input on the BNC port
•
Choose the Settings→BNC→Input to Analyzer Arm (ALT, S, B, R)
command.
The HP 64700 Series emulators have a BNC port for connection with external
devices such as logic analyzers or oscilloscopes.
This command allows an external trigger signal to be used as an arm (enable)
condition for the internal analyzer.
86
To output the trigger signal on the BNC port
To receive an arm condition input on the BNC port