Listening To A Program Source - Sherwood VR-758 User Manual

Continued
At the desired tone mode, adjust as
desired.
9
Main unit
ADJUST
or
At either tone control or tone defeat mode, each
time the ADJUST(/CH LEVEL) UP(
DOWN( ) button is pressed, the tone mode
changes as follows:
TONE DEFEAT : When listening to a program source
without the tone effect.
TONE CONTROL : When adjusting the tone for your taste.
To mute the sound.
RC
MUTE
To listen with the headphones.
Main unit
PHONES
RC
ADJUST/CH LEVEL
• In general, we recommend the bass and treble to be
• To complete tone adjustment, repeat the above
) or
• Extreme settings at high volume may damage your
• When the digital signals from DTS, Dolby Digital
• The STANDBY indicator will flicker.
• To resume the previous sound level, press the
• Ensure that the SPEAKER button is set to off.
• When listening to a DTS or Dolby Digital program
15
At the desired tone (bass or treble), each time the
ADJUST(/CH LEVEL) UP(
button is pressed, the tone level can be adjusted
within the range of -10~ +10dB
adjusted to 0(flat) level.
steps 8 and 9.
Notes :
speakers.
program sources, etc. are played back, the tone
control cannot be adjusted and the tone defeat
mode is automatically selected.
button again.
source, if the headphones are plugged in and the
SPEAKER button is set to off, it enters the 2-CH
downmix mode automatically.(For details, refer to "2
CH downmix mode" on page 20.)
) or DOWN( )