Sherwood VR-758 User Manual page 6

3. Connecting DIGITAL INs and
O U T
• The OPTICAL and COAXIAL DIGITAL OUTs of the
components that are connected to AUX/TV,
TAPE/MD, VIDEO 1 and VIDEO 2 of this unit can
be connected to these DIGITAL INs.
• A digital input should be connected to the
components such as LD player, CD player or DVD
player, etc. capable of outputting DTS, Dolby Digital
or PCM format digital signals, etc.
• If the MD recorder or CD recorder with OPTICAL IN
jack is connected to the OPTICAL OUT jack of this
unit, you can record the high quality sound of CDs,
etc. without degradation. For details, refer to the
operating instructions of the connected component.
• You can connect the OPTICAL OUT jack to the
OPTICAL IN jack of an additional MPEG decoder,
etc.
Notes :
• The OPTICAL DIGITAL OUT outputs the digital
signal as it is being input into the OPTICAL or
COAXIAL DIGITAL IN jack of this unit or it is being
reproduced on the DVD player of this unit.
• When making the COAXIAL DIGITAL connection,
be sure to use a 75Ω COAXIAL cord , not a
conventional AUDIO cord.
• All of the commercially-available optical fiber cords
cannot be used for audio equipments. If there is an
optical fiber cord which cannot be connected to your
audio equipments, consult your dealer or nearest
service organization.
4. Connecting speakers
• Be sure to connect speakers firmly and correctly
according to the channel (left and right) and the
polarity (+ and -). If the connections are faulty, no
sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the
sound will be unnatural and lack bass.
• For installing the speakers, refer to "Speaker
placement" on page 17.
• After installing the speakers, first adjust the
speaker settings according to your environment
and speaker layout.(For details, refer to "Adjusting
the speaker settings" on page 18.)
Caution
• Be sure to use the speakers with the impedance of
8 ohms or above.
• Do not let the bare speaker wires touch each other
or any metal part of this unit.
This could damage this unit and / or the speakers.
Front right Front left
Surround right
7
Component(such as MD
recorder, CD recorder, etc.)
with OPTICAL DIGITAL IN
Component with
OPTICAL DIGITAL OUT
Component with
COAXIAL DIGITAL OUT
Center
Surround left