Sherwood VR-758 User Manual page 5

2. Connecting audio/video components
COMPOSITE VIDEO IN
COMPOSITE VIDEO OUT
S-VIDEO IN
S-VIDEO OUT
Video deck
POWER MULTIPLE COMPACT DISC PLAYER CDC-5080R
ON/OFF
V-CD PBC REVERT PROG AUTO RANDOM REPEAT ALL 1 DISC S 1 2 3
GRAPHICS PEAK DELETE EDIT A B SCENE TRACK INDEX STEP A< >B MPX INTRO 4 7 5 8 9 6
OPEN/CLOSE 1 2 3 4 5 10 13 11 12 14 15
PHONES LEVEL
PHONES
AUDIO PLAY(OUT)
AUDIO REC(IN)
AUDIO OUT
Additional TV or
audio component
PLAY (OUT)
Tape deck or
REC (IN)
MD recorder
• The AUX/TV jacks may be connected to an additional TV or audio component such as a CD player, tape deck, etc..
• Only during playback of DVD Videos on this unit, the MONITOR COMPONENT VIDEO OUTs of this unit can be
capable of outputting either conventional interlacing video signal or progressively scanned video signal (that
can reproduce high-density pictures with less flicker).
• According to the types of video signals, the excellence in picture quality is as follows :
"Progressive COMPONENT" > "Interlaced COMPONENT" > "S-VIDEO" > "COMPOSITE"
• When making COMPONENT VIDEO connections, connect "Y/PY" to "Y"(or PY), "Cb/Pb" to "Cb"(or "B-Y, "Pb")
and "Cr/Pr" to "Cr"(or "R-Y", "Pr").
• Depending on the type of the COMPONENT VIDEO INs of Monitor TV, be sure to set the COMPONENT
VIDEO OUTPUT SIGNAL to the corresponding setting.
(Refer to "CHANGING THE COMPONENT VIDEO OUTPUT SIGNAL" on page 39.)
• A signal input into S-VIDEO IN jack will be output in the MONITOR S-VIDEO OUT jack only.
• In case of COMPOSITE VIDEO signal, a signal input into VIDEO 1 COMPOSITE VIDEO IN jack will be output
in the MONITOR COMPOSITE VIDEO OUT jack only and a signal input into VIDEO 2 COMPOSITE VIDEO IN
jack will be output in the VIDEO 1 and MONITOR COMPOSITE VIDEO OUT jacks.
Notes :
• When the COMPONENT VIDEO OUTPUT SIGNAL is set to PROGRESSIVE TV, the S-VIDEO and
COMPOSITE VIDEO OUTs of this unit cannot output the video signals, meaning the picture will not be shown.
• When the progressive video signals are input into the non-progressive COMPONENT VIDEO INs of monitor
TV, the picture may not be shown normally.
Therefore, when the progressive COMPONENT VIDEO INs of monitor TV are not connected to, you should set
the COMPONENT VIDEO OUTPUT SIGNAL to INTERLACE TV.
• Do not connect the unit to the TV through a VCR. Otherwise the picture may be disturbed due to the copy
protection function.
6
Monitor TV
COMPOSITE VIDEO IN
S-VIDEO IN
COMPONENT VIDEO IN