Playing Tracks In Desired Order [Cd Only] - Sherwood VR-758 User Manual

PLAYING TRACKS IN DESIRED
• Up to 25 tracks can be programmed to be played in any desired order.
In the stop mode, press the PROGRAM button.
1
RC
PROGRAM
Select the desired track with pressing the NUMERIC buttons on the remote control.
Example) When the track 5 and 12 are programmed.
2
• For 5 :
5
• For 12 :
+ 10
Repeat the above step 2 until the desired tracks are programmed.
3
To start program play, press the PLAY( ) button or the ENTER button.
4
Main unit
or
Clearing the programmed tracks
To clear one by one
• During programming, press the CLEAR button.
RC
CLEAR
To clear all programmed tracks
• During programming, press the PROGRAM button
and when the STOP( ) button is pressed to stop
program play, press the PROGRAM
buttonrepeatedly.
RC
PROGRAM
PROGRAM P00:00
PROGRAM P0 1:0 5
2 PROGRAM P02:12
RC RC
ENTER
or
35
• Then the program mode is displayed on the TV
screen.
• When the PROGRAM button is pressed again, the
program mode is canceled.
Programmed track number
Programmed order
• Play will start in the programmed order.
• After all programmed tracks have been played, it
enters the stop mode without clearing the
programmed tracks.(Program play is suspended)
• Each time this button is pressed, the programmed
tracks are cleared one by one in the opposite order.
• Once program play is performed, you cannot clear
one by one.
• Then the programmed tracks are all cleared.
• Opening the disc tray or selecting an input source,
etc. clears all programmed tracks.