Operation Of Tuner Listening To Radio Broadcasts - Sherwood VR-758 User Manual

LISTENING
Auto tuning
Select the tuner.
1
Main unit
INPUT
SELECTOR
Select the desired band.
2
Main unit
FM/AM MODE
Band
Select the tuning mode.
3
Main unit
T/P MODE
Press the UP( / /+) or DOWN( / /-) button
for more than 0.5 second.
4
Main unit
ADJUST/CH LEVEL
ADJUST
or
Manual tuning
• Manual tuning is useful when you already know the frequency of the desired station.
• Perform the steps 1~3 in "Auto tuning" procedure and press the UP( / /+) or DOWN( / /-) button repeatedly
until the right frequency has been reached.
Main unit
ADJUST/CH LEVEL
ADJUST
or
TO RADIO
RC
INPUT
SEL.
or
Frequency
RC
RC
TUNING
or
RC RC
TUNING
or
52
• Each time this button is pressed, the band changes
as follows:
FM STEREO FM MONO
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono mode
to reduce the noise, then FM broadcasts are
reproduced in monaural sound.
• Each time this button is pressed, the mode changes
as follows:
Tuning mode : "CH" goes off.
Preset mode : "CH" lights up.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the
tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When the TUNING UP(+) or DOWN(-) button is
pressed, the tuning mode is automatically selected
without pressing the T/P MODE button.
AM MONO