Sherwood VR-758 User Manual page 41

Continued
When selecting the OSD LANGUAGE
• You can select the OSD(On-Screen Display) language to be displayed.
When selecting the CAPTIONS
When selecting the SCREEN SAVER
• A TV screen may be burned out if a static picture is displayed for a long time in the stop mode or the pause
mode, etc.. To prevent this, set the SCREEN SAVER to ON. Then the unit automatically activates the screen
saver function if a static picture is displayed for over 5 minutes.
Note :
• The monitor screen of a projector or projection TV is easily burned out if a static picture is displayed for a long
time. Be careful not to allow the monitor screen to be burned out when the SCREEN SAVER is set to OFF.
Press the CURSOR
2
RC
Press the CURSOR
3
RC
• You can select one of ENGLISH, FRENCH,
GERMAN, ITALIAN, DANISH and SPANISH.
button to select the setting menu.
• Each time the CURSOR
the setting menu or the item menu is selected.
/ buttons to select the preferred setting, then press the ENTER button.
RC
ENTER
• The selected setting is colored.
42
or button is pressed,